PDA

View Full Version : Audio input



michalp8
23-11-2009, 08:25 PM
Hi how to control and play audio from sound input, I want to send sound witch video by SDI and capture by blackmagic, Catalyst see that input but I dont know how to control it.

NevBull
23-11-2009, 09:04 PM
I believe you can only playback audio from a Quicktime file, not live input. Catalyst can see audio inputs, but those are used for sound triggered video FX.

Nev.

Mr_P
24-11-2009, 02:16 AM
Currently I dont think this is possible with SDI embedded audio...


Catalyst see that input but I dont know how to control it.

What exactly are you 'seeing'?

You would have to extract the embedded SDI audio BEFORE it is captured by catalyst, so that you could route it to a dedicated sound mixer. There would be little point processing the sound with the single SDI video input available on the blackmagic card....

I could see the point if you were using multiple Phoenix SDI cards - However, most of the time sound engineers prefer to process sound separately from video and computers


Check out:

http://www.kramerelectronics.com/products/model.asp?pid=30&sf=80
or
http://www.bal.co.uk/cgi-bin/cp-app.cgi?usr=51F1548641&rnd=3234906&rrc=N&affl=&cip=81.174.146.109&act=&aff=&pg=cat&ref=BBEMBED

DO let me know if you require any further support or need to test this scenario...


Simon