PDA

View Full Version : transport control



kiwi
07-11-2009, 09:36 PM
Hi Richard,
The transport control is very useful for longer movie files when running from a certain point during rehearsals. However it is unusable when controlling from a DMX console.
What would be great is a button that allowed you to override the DMX control for only the playmode, inframe and outframe parameters.

This would allow us to quickly cue up a movie by scrubbing to the correct point whilst retaining all the other parameters, manually play the movie and reinstate control to DMX when we're done

Thanks
Paul

FinnRoss
17-11-2009, 04:43 PM
when the movie has been told to play by DMX you can scrub using the play back bar at the bottom.

Mr_P
17-11-2009, 06:06 PM
Paul

You can do this on a layer by layer basis...

If you set up your cue with DMX - then turn off the DMX control of that layer in the catalyst control window - the values will remain until changed.

This means that you CAN scrub to the correct point manually

Once done - switch on the DMX controller on the Catalyst Control window to re-gain DMX control.

You can also enable / disable DMX control via the 'control/ tab on the webserer.

Simon