emilianomorgia
13-03-2007, 08:15 PM
I'll be ready to buy this disk , but I don't know if there is any way to mount it inside a Mac Pro .
http://www.sandisk.com/Oem/Default.aspx?CatID=1478
It cost only 350 euro and it have read rate of 62-megabyte (MB)*/sec and a random read rate of 7000 inputs/outputs per second (IOPS) for a 512-byte transfer.
Anyway to mount it inside a Mac Pro ? what do I need ?
High capacity in small form factor
o 1.8" small form factor supporting unformatted capacity of 32GB
o 8mm case height
o Zero Insertion Force (ZIF) connector
• Interface to host
o Standards: ATA-2/ATA-3/ATA-4/ATA-5/ATA-6/ATA-7
• High performance
o Host transfer rate: 100MB/s
o Internal transfer read rate: 62MB/s
o Internal transfer write rate: 36MB/s
o Average access time: 0.11msec
• Low power consumption
o Supply voltage: 3.3Vdc
o Typical read/write: 137mA
o Typical idle: 66mA
o Typical standby: 18mA
o Typical sleep: 8mA
• Highly reliable
o Mean time between failure (MTBF): 2,000,000 hours, based on Part Stress Analysis
o Operating shock: 1,500G, 0.5msec half sine
o Operating vibration: 2.17G, 7-500 Hz
o Operating temperature: 0 ̊C to 70 ̊C
o Non operating temperature and storage: -55 ̊C to 95 ̊C
http://www.sandisk.com/Oem/Default.aspx?CatID=1478
It cost only 350 euro and it have read rate of 62-megabyte (MB)*/sec and a random read rate of 7000 inputs/outputs per second (IOPS) for a 512-byte transfer.
Anyway to mount it inside a Mac Pro ? what do I need ?
High capacity in small form factor
o 1.8" small form factor supporting unformatted capacity of 32GB
o 8mm case height
o Zero Insertion Force (ZIF) connector
• Interface to host
o Standards: ATA-2/ATA-3/ATA-4/ATA-5/ATA-6/ATA-7
• High performance
o Host transfer rate: 100MB/s
o Internal transfer read rate: 62MB/s
o Internal transfer write rate: 36MB/s
o Average access time: 0.11msec
• Low power consumption
o Supply voltage: 3.3Vdc
o Typical read/write: 137mA
o Typical idle: 66mA
o Typical standby: 18mA
o Typical sleep: 8mA
• Highly reliable
o Mean time between failure (MTBF): 2,000,000 hours, based on Part Stress Analysis
o Operating shock: 1,500G, 0.5msec half sine
o Operating vibration: 2.17G, 7-500 Hz
o Operating temperature: 0 ̊C to 70 ̊C
o Non operating temperature and storage: -55 ̊C to 95 ̊C